Category: Bosch

Bosch lists E10 with suffixes -00, -10, or -20 as a blocked pump in the intelligent dosing system. The code applies to washers equipped with that dosing feature. A standard manual dispenser does not have the same pump unit. Use the Exact Manual Procedure Bosch instructs owners to place the appliance in standby and clean…

Bosch E33 or F33 means the washer detected detergent foam. Bosch links the condition to too much detergent or old detergent, especially when lightly soiled laundry is washed with a dose intended for a dirtier load. Correct the Next Dose Let the current cycle follow its foam-management routine. For the next comparable load, reduce detergent…

The Bosch Washer E16 / F16 Code usually means the washer door is open or not locked properly. In simple terms, the machine cannot confirm a safe door-lock condition, so it will not start the cycle or continue washing until the problem is resolved. In many cases, this is a simple door-closure issue rather than…

The Bosch Washer E18 / F18 Code usually means the washer is not draining properly. In most cases, the machine still detects water inside the drum after the drain stage should be complete, so the cycle stops and the E18 or F18 error appears on the display. In many homes, the cause is something simple…

The Bosch Washer E17 / F17 Code usually means the water supply time has been exceeded. In simple terms, the washer is not getting water into the machine quickly enough, so the cycle cannot continue normally. In many homes, the cause is something simple, such as the tap not being fully open, low water pressure,…

If your Bosch washer stops during a cycle and shows an error code, the display is usually pointing you toward the general problem area. In many cases, that area is water supply, drainage, door locking, heating, leak protection, or sensing. This guide brings the most common Bosch Washer Error Codes together in one place so…