Washer Error Codes List by Brand

Washer error codes are warning messages that help identify what may be wrong with a washing machine. When a washer stops mid-cycle, refuses to drain, will not fill, stays locked, or fails to spin, the code on the display can point you toward the first area to check.

Washer Code Guide helps you look up common washer error codes by brand and understand what they usually mean. Each guide explains the likely cause, basic troubleshooting steps, and when professional appliance service may be needed.

Browse Washer Error Codes by Brand

Different washer brands use different error code systems. A drain problem on one brand may appear as one code, while another brand may use a completely different display message for a similar issue.

LG Washer Error Codes

LG washers commonly display codes related to draining, water filling, load balance, door lock, motor issues, and sensor problems. If your LG washer shows a code, start with the main LG washer error codes guide.

Popular LG washer code guides include:

LG Washer OE Code
LG Washer IE Code
LG Washer UE Code
LG Washer LE Code
LG Washer CL Code
LG Washer dE Code

Samsung Washer Error Codes

Samsung washer error codes often point to water supply issues, drain problems, door lock faults, unbalanced loads, or sensor-related conditions. For Samsung-specific washer faults, visit the Samsung washer error codes section.

Common Samsung washer codes include:

Samsung Washer 4C Code
Samsung Washer 5C Code
Samsung Washer UB Code
Samsung Washer DC Code
Samsung Washer SE Code
Samsung Washer LC Code

Whirlpool Washer Error Codes

Whirlpool washers may show error codes related to long drain times, water level problems, door lock failures, motor control issues, and communication faults. You can browse Whirlpool-related guides from the Whirlpool washer error codes section.

Common Whirlpool washer codes include:

Whirlpool Washer F21 Code
Whirlpool Washer F9 E1 Code
Whirlpool Washer LF Code
Whirlpool Washer F5 E2 Code
Whirlpool Washer F8 E1 Code

Maytag Washer Error Codes

Maytag washer error codes are often similar to Whirlpool-style fault codes because many models share related platforms and control logic. Start with the Maytag washer error codes section if your washer displays a Maytag-specific code.

Common Maytag washer codes include:

Maytag Washer LF Code
Maytag Washer F9 E1 Code
Maytag Washer LOC Code
Maytag Washer F8 E1 Code
Maytag Washer SD Code

GE Washer Error Codes

GE washer fault codes may point to lid lock problems, water level issues, drain restrictions, motor faults, or control board communication errors. GE washer content can be found in the GE washer error codes section.

Common GE washer problems include:

GE washer not draining
GE washer not spinning
GE washer lid lock problems
GE washer water fill issues
GE washer balance problems

Bosch Washer Error Codes

Bosch washers may display codes related to drainage, door lock faults, water supply restrictions, heating problems, or motor-related issues. Bosch-specific guides are organized in the Bosch washer error codes section.

Common Bosch washer code areas include:

Bosch washer drain errors
Bosch washer water inlet errors
Bosch washer door lock faults
Bosch washer heating or temperature sensor errors
Bosch washer motor or control issues

Most Common Washer Error Code Categories

Although every brand uses its own code system, many washer error codes fall into the same general categories. If you are not sure where to start, you can also review the full washer troubleshooting guide.

Drainage Error Codes

Drain-related washer codes usually appear when water is not leaving the machine properly. Common causes include a clogged drain filter, blocked drain hose, restricted household drain, or failing drain pump.

Signs of a drain problem may include water left in the drum, wet clothes after the cycle, a humming pump, or a washer that stops before spinning. Examples include the LG Washer OE Code and the Samsung Washer 5C Code.

Water Fill Error Codes

Water fill codes usually mean the washer is not receiving enough water or cannot detect the correct water level in time. Common causes include closed water valves, kinked inlet hoses, clogged inlet screens, low household water pressure, or a faulty water inlet valve.

Examples include the LG Washer IE Code and the Samsung Washer 4C Code.

Door Lock Error Codes

Door lock or lid lock codes may appear when the washer cannot confirm that the door is safely closed and locked. This can happen because of clothing caught in the door, a damaged latch, a failed lock assembly, wiring issues, or a control problem.

Load Balance Error Codes

Balance-related codes usually appear during the spin cycle. The washer may detect that the load is uneven, too heavy on one side, or too small to balance properly.

Redistributing the load, removing heavy items, or leveling the washer may help. For LG models, see the LG Washer UE Code guide.

Motor and Control Error Codes

Motor, sensor, and control board codes may require more careful diagnosis. These codes can involve the motor, wiring, hall sensor, control board, drive system, or internal communication between components.

If a motor or control-related code keeps returning, professional service is usually the safer choice.

What to Check Before Calling for Service

Before calling a technician, there are a few basic checks that may help:

Make sure the washer has power.
Confirm water supply valves are open.
Check that inlet hoses are not kinked.
Inspect the drain hose for bends or restrictions.
Clean the drain filter if your model has an accessible one.
Make sure the washer door or lid is fully closed.
Redistribute an unbalanced laundry load.
Try a reset if your washer model supports it.

When to Stop Troubleshooting

Stop using the washer and contact a qualified appliance repair professional if you notice:

Burning smell
Smoke
Electrical sparks
Repeated breaker trips
Water leaking near electrical parts
Severe vibration or banging
A locked door that will not release safely
The same error code returning after basic checks

Related Washer Guides

Final Thoughts

Washer error codes can make a frustrating appliance problem easier to understand. The key is to look up the exact brand and code, check the simplest causes first, and avoid assuming that one code always means one failed part.

Use this washer error codes index to find the right brand guide and start troubleshooting with a clearer direction.