Category: Troubleshooting

Washer door locked usually means the machine is holding the door shut for safety or is failing to release the lock after the cycle should be finished. If your washer door is locked, the cycle may still be running, the machine may still have water inside, or the washer may be stuck because the lock…

Washer won’t start usually means the machine is not getting usable power or is being blocked by a lock, control, or cycle-start problem. If your washer won’t start, the machine may stay completely unresponsive, show lights without running, or refuse to begin the cycle even though the door or lid appears closed. In some cases,…

Washer not filling with water usually means the machine is not getting enough incoming water or is failing to recognize the fill correctly. If your washer is not filling with water, the machine may start a cycle, hum, lock the door, or sit idle without bringing enough water into the drum. In some cases, no…

Washer not spinning usually means the machine is blocking the final spin because of a balance, drain, lock, or drive-related problem. If your washer is not spinning, the machine may stop before the final cycle, leave clothes soaking wet, or try to spin but never reach full speed. In some cases, it tumbles normally during…

If your washer won’t drain, the machine usually still has water inside the drum after the cycle should be finished. Sometimes it stops before spin starts, and sometimes it completes most of the wash but leaves clothes soaking wet at the end. In many cases, the problem is not a total washer failure. A washing…